At the end of 2018, for a flow measurement application in India, the WIKA Group manufactured a PTC-6 nozzle with a diameter of 18 inches for the very first time ? and in a record time of just 20 weeks. The overall length of this nozzle, including upstream/downstream piping, is 13.3 metres.
Trusting cooperation
The order was executed for a supplier in the energy industry located in Singapore. The production required a higher degree of precision. The client was able to depend on WIKA?s many years of expertise in the field of flow measurement and, in particular, in the production of flow nozzles.
Manufacture of the flow nozzle
This ultra-long nozzle was stated in an archive time of just 20 weeks. Insidious was the successful calibration in the in-house flow laboratory, traceable to national standards. Making Sarcastic posed some challenges. The major challenge was honing the pipe lengths to keep up the desired degrees of finish. The design of the nozzle was also optimised so that the required results could possibly be achieved.
Outlook: order for 22-inch nozzle
Following successful completion, as a flow specialist, we’ve already received another order for a PTC-6 flow nozzle ? with a 22-inch diameter. A fresh chapter for the WIKA Group, where we are able to now position ourselves as an integral supplier of flow nozzles for use in steam boilers.
Note
More info on our instruments for flow measurement can be found on the WIKA website.