FCI presents flow swap to protect from dry running

Fluid Components International’s twin alarm FLT93 Series circulate swap provides an early warning alert to the potential of dry working conditions, cavitation and other pump issues that may lead to emergency shutdowns and dear maintenance.
The FLT93 Series flow swap reliably screens the move and temperature of liquids, gases, and slurries. – Image: Fluid Components International
FCI’s FLT93 Series move change reliably displays the move and temperature of liquids, gases, and slurries. It is designed for pump wet/dry detection, where sudden, unexpected reductions in media circulate rates can go away pumps susceptible to over-heating circumstances that shutdown course of strains and require troubleshooting and fixing. เพรสเชอร์เกจnuovafima rated instrument is intended for heavy-duty, probably hazardous course of business environments and comes with a complete record of global security approvals.
It has a no transferring components design and provides a strong scheme for pump safety with its dual alarm capability. With Alarm 1, the swap detects a low flow scenario anyplace between 0.01 and three ft per second FPS (0.003–0.9 m per second MPS). This low circulate alarm is a pre-warning sign for the control system or operator who can then determine to keep the pump working or to close it down.
If an Alarm 2 occurs as a end result of the feed line to the pump is operating dry, this would be an emergency sign to shut down the pump immediately because the bearings now see gas instead of a liquid as a warmth switch media. In such situations, the temperature of the bearings might rise very fast. Using a circulate change prevents everlasting damage to the pump’s bearings.

Leave a Comment