Vibration protection: Case filling vs. dampened movement

Vibrations will often violently load Bourdon tube pressure gauges. Useless cause pointer flutter and also, in the event of sustained loading, harm to the measuring system, even to the stage of total failure. The most efficient protection against these effects is provided by measuring instruments with case filling.
The principle is easy: The pressure gauge case is filled with a liquid, usually glycerine or silicone oil. Regarding vibrations, the case filling optimally dampens the vibrations of the Bourdon tube, transmission mechanism and movement. It therefore prevents pointer flutter, and therefore the displayed measured value remains clearly readable. Concurrently, the measuring system is protected against premature wear, because the fill fluid acts as a lubricant for the moving components. Exposed extends the service life of the pressure gauge.
Figure 1: View of the within of a pressure gauge with a dampened movement. The circle marks the seat of the pot with the silicone oil that accommodates the pointer pinion.
Highly viscous silicone oil
Instead of an instrument with case filling, a pressure gauge with silicone-dampened movement is often chosen. In this design, the pointer pinion moves in a pot of highly viscous silicone oil. As a result, the pointer also operates largely free of vibration. However, this effect, which is essential for immobilising the pointer, slows down other moving components of the movement. The result is a significantly higher wear of these parts than with a pressure gauge with fill fluid.
WIKA confirmed this information some time ago within an internal laboratory test with different pressure gauge versions. Unfilled pressure gauges, pressure gauges with dampened movement and pressure gauges with case filling were subjected to an endurance test under practical conditions that have been harsher than those of the EN 837-1 pressure gauge standard. The investigation produced the next results:
Pressure gauge version (type of dampening)
Zero point offset after 50 hrs / 200 hrs
Condition of the instruments after 200 hours
Unfilled / without dampening
2,3% / 3.0%
Conditionally functional
Dampened movement
2,3% / 66%
No longer functional
Liquid-filled
0,6% / 0,8%
Fully functional
Fast wear
In the test, the unfilled variant turned out to be relatively resistant. However, given the inevitable pointer flutter, this type of pressure gauge is not recommended for applications with vibrations. This verdict also pertains to the version with dampened movement, particularly in applications with stronger and sustained vibrations. The pointer stability is, in cases like this, countered by a rapid wear of the other moving parts. This version was, already, no more functional well before the finish of the test.
Figure 2: Cracks in the Bourdon tube or perhaps a worn-out link are types of typical vibration damage in the mechanisms of pressure gauges. Such wear is prevented by case filling.
The pressure gauge with case filling was the only real variant which remained fully operational. Due to fill fluid, the chance of leakage is often used as an argument against this type of instrument. WIKA cases with filling are therefore designed and handled to reduce the chance of leakage because of vibration to the very least.
Note
To learn more on our selection of pressure gauges, visit the WIKA website.
See also our article
Filling liquids in pressure gauges: Usage and advantages

Leave a Comment